New: Xhorse VVDI Range
The capabilities of the Xhorse range is extensive and covers all the highly profitable jobs. The Key Tool can save the user both stock and money through cloning and creating transponders and remotes as well as have the ability to unlock OEM remotes.
The VVDI2 Full Package covers VAG, Porsche, BMW and PSA. This package even has EEPROM software built in, saving on additional tool costs.
The VVDI MB Tool covers a wide range of Mercedes vehicles. It is user-friendly and can be used without plugging in extra cables and adaptors to read the password. This works well with the VVDI Programmer to read the EIS in circuit.
Xhorse VVDI MB Tool
VVDI MB is an advanced machine designed to make complex Mercedes vehicles jobs quicker and easier to complete with step by step and easy to follow instructions. It is designed to work with VVDI Prog but this not always necessary, only when the dump is needed.
Read/Write Key
Features include: Key identification, read/write BE key via IR, Read v51 and v57 version passwords via NEC key adaptor, read/activate blank BGA key (0CF4), repair keys, renew/write used NEC keys, write NEC keyless key etc.
EIS Tools
Features include: Reading EIS via OBD and IR, OBD module support auto detect, read W164, W209 and W211 without gateway, read old Motorola EIS password via IR, renew EIS, replace EIS, enable keys, disable keys, personalise W204 ESL, test EIS and ELV, working key status etc.
Password Calculation
Features include: OBD read and calculate all CAN EIS(FBS3) key passwords, support BGA, NEC, v51 and v57 keys, supports lost key scenarios for W209, W211, W166, W212, W246, W212(old), W204 and W207 etc.
Prepare Key File
Features include: online key file preparation for v11, v41 and v51 versions, supports Motorola EEPROM dump file with 100% success rate.
ESL Tools
Features include: OBD (K) read data; renew ESLs, Replace ESLs without the need to renew the EIS, check ESL damage status; repair W204 ESL (0xAA error) etc.
Renew ECU/Gearbox/lSM
Features include: Supports renewal, write VIN, personalisation operation for module ECU, Gearbox, ISM etc
Read/Write CGW (ZGW), KM Repair
Supports repair of the following KM: W204, W207, W212, W251, W164, W211, W221, W216, W166, Wl72, W232 and W205 etc.
Supports the reading/writing of gateway EEPROM and FLASH: W211/W164, W204/W207/W212, W221 and W216 etc.
Xhorse VVDI Key Tool
The Xhorse Key Tool is a new generation of transponder programmer which has been developed specifically for auto locksmiths. Whether you are already an established auto locksmith or just starting out in the industry, the Xhorse VVDI Key Tool is the perfect addition to your business.
With this tool you will be able to generate a remote, clone a transponder, prepare a transponder and even renew an OEM remote, making this a great all-round piece of equipment.
Transponder Editing & Cloning
Supports 11/12/13/30/33/36/40/41/42/46/47/48/4C/4D-60/61/62/63/64/65/67/68/69/72-G/73,83 and 4E/8C chips.
Transponder Generating
Supports TP transponders for more than 700 vehicle models.
Frequency & Power Tester
Frequency testing range: 27-900Mhz
Power testing range: 300-350Mhz
Remote Cloning
Rolling Code & Fixed Code
Remote Generating
Supporting 128 brands including over 2000 vehicle models
Garage Remote Generating
Over 100 different variations
Renewing Remotes
NXP Keyless & Proxy Remote
Covers 18 brands
Update Software Download
Xhorse VVDI2 VAG Tool
This stand-alone software reads the CS bytes, login code and fault codes as well as being able to program the transponders and remotes to VAG vehicles as well as performing actuator tests, adaptions and coding to control modules.
VAG Software
Supports VW, Audi, Skoda, Seat, Porsche, Bentley etc.
Features include: Diagnostics, 4th immobiliser, 5th immobiliser, key learning, remote learning, KM repair, Engine Control Unit (Passat/CC via OBDI I), K-Line instrument and immobox, unit adaption, component protection, dump tool etc.
MQB programmming and ID48 Cloning Package (Added Extra)
Transponder Programmer Software
Features include: Transponder programming, Immobiliser data tool, remote production, remote copying, transponder copying (11, 12, 13, 40, 44, HITAG2(46), 48), other key functions (finding CS 7th byte) etc.
Others
Peugeot/Citroen/OS read PIN via OBDI I, key learning; support PassThru J2534 interface, option to run 3rd party software under VVDI2 (ODIS etc); remote frequency testing, lost device locking etc
Xhorse VVDI2 Full Package
The Xhorse VVDI2 Full Package comes with BMW, Porsche, VAG and PSA capabilities as well as a transponder programmer to make transponders from EEPROM files, clone and prepare transponders. Built in software and cable included for making up remotes and testing the frequency of remotes.
VAG Software
Supports VW, Audi, Skoda, Seat, Porsche, Bentley etc.
Features include: Diagnostics, 4th immobiliser, 5th immobiliser, key learning, remote learning, KM repair, Engine Control Unit (Passat/CC via OBDI I), K-Line instrument and immobox, unit adaption, component protection, dump tool etc.
MQB programmming and ID48 Cloning Package (Added Extra)
BMW Software
Fatures include: Unit coding, OBD key learning (CAS1/CAS2/CAS3/CAS3+), make keys from file (CAS1/CAS2/CAS3/CAS3+/CAS4/CAS4+), KM repair, read/write EWS/CAS EEPROM, synchronisation of DME with CAS, synchronisation of CAS with ELV, key unlocking, CAS repair etc
Optional Function :BMW FEM/BOC key programming, get key info->programming FEM/BOC system->make keys
Porsche Software
Features include: preparation of dealer keys with EEPROM, learn dealer keys via OBDI I. EEPROM supports: 1 L 15Y, 2M25J, 5M48H, 1 N35H
Transponder Programmer Software
features include: Transponder programming, special transponders, Immobiliser data tool, remote production, remote copying, transponder copying (11, 12, 13, 40, 44, HITAG2(46), 48), other key tool functions (find CS 7th byte) etc
Others
Peugeot/Citroen/OS read PIN via OBDI I, key learning; supports PassThru J2534 interface, the option to run 3rd party software under VVDI2 (ODIS etc); remote frequency testing, lost device locking etc
Xhorse VVDI Programmer
This software allows you to read and write EEPROM data files, flash (program and data) memory and MCUs and save them in the software application. You can then import the saved files into your transponder programming device (Tango, VVDI2.Miraclone etc.) and use them to program transponders or to read the immo code.
Key Features
Stable reading/writing of MC9S12XE series chips (5M48H/1N35H/2M53J/3M25J etc.)
Quickly erase M35080/D80(M350803/M350806/M35080V6/M35080VP/080D0WQ/160D0WQ) or add more chips (MC68HC05,TMS370,MAC7XXX etc.)
Script function coming soon
Free Training Session
This training is only available with the purchase of either the Xhorse VVDI2 Full Package or the VVDI MB Tool.
The training session is approximately 4 hours, which will include lessons in how to install software and update the tool. The course will give you an overview of how the product works and the individual components. There will also be a demonstration of how to complete a job.
|
VVDI MB Tool Training Overview
|
VVDI2 Full Training Overview
|
LIMITED SPACES AVAILABLE! Once purchased a member of the team will contact you to install your software and book you onto an available training course.
* Free training only available with selected packages purchased. Training on selected dates only and limited availability. Manager reserves the right to cancel training at any time. Training dates are subject to change.